Chapter 8. Maintenance and Troubleshooting
152 Model PM880 Portable Hygrometer User’s Manual
8.10.2 Configuring the Battery Charger
The PM880 battery charger has a switchable voltage input of 115 to 230
VAC. Before you plug the pack into the charger you must make sure the
voltage selector is in the correct position.
WARNING! The battery charger is intended for indoor use only.
See Specifications for the power cord type.
Risk of electrical shock: use in dry locations only.
Charge on NiMH type rechargeable batteries.
Other types of batteries may burst causing injury and/or
damage.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
!DANGER!
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, CAREFULLY
FOLLOW THE GUIDELINES BELOW.
BE SURE THE VOLTAGE SELECTOR IS IN THE CORRECT VOLTAGE
POSITION BEFORE PLUGGING THE UNIT IN.
(SEE THE BOTTOM OF THE CHARGER.)
FOR USE IN THE UNITED STATES, THE VOLTAGE SELECTOR SWITCH
MUST BE PLACED IN THE 115 VOLT POSITION.
FOR USE IN COUNTRIES OUTSIDE THE UNITED STATES, PLACE THE
VOLTAGE SELECTOR IN THE CORRECT POSITION. CONFIRM THE
VOLTAGE AVAILABLE AT YOUR LOCATION BEFORE USING THE
PRODUCT.
FOR CONNECTION TO A SUPPLY NOT IN THE UNITED STATES, USE AN
ATTACHMENT PLUG OR ADAPTOR OF THE PROPER CONFIGURATION
FOR THE POWER OUTLET.
To Next Page
Loading...
