Chapter 8. Maintenance and Troubleshooting
132 Model PM880 Portable Hygrometer User’s Manual
8.1 Checking the PM880 Memory Status
The PM880 stores all types of files in its memory. Each type of Manager
enables you to monitor the size of a file and the remaining amount of
memory. Use the following steps to check the memory status:
8.1.0a Accessing the Site, Drive or Log Manager
1. If the menu is not active, press [MENU].
2. To check:
• site, meter, log or snapshot files, press Site and press [ENTER].
• log files only, press Logging and press [ENTER].
3. Use the arrow key to scroll to:
• Site Manager and press [ENTER] - to check site files only.
• Drive Manager and press [ENTER] - to check all types of files.
• Log Manager and press [ENTER] - to check log files only.
8.1.0b Selecting a Log File
1. Use the arrow key to scroll to the desired files. If you do not see the
desired log in the list, refer to Viewing All Logs on page 85 to display all
the existing logs.
Note: The list of files in each Manager can be listed chronologically or
alphabetically. Refer to Sorting Files in the Site/Drive/Log Manager
on page 108.
2. Check the lower right-hand corner of the window. You should see the
current date and time, the size of the selected file and the remaining
amount of memory.
Next, do one of the following:
• To check the size of another file, use the arrow keys to scroll to the
desired file.
• To exit and return to taking measurements, press [F3] (Exit) and then
press
[MENU].
To Next Page
Loading...
Need help?
General
