Chapter 7. Using the PM880 with a PC and Printer
110 Model PM880 Portable Hygrometer User’s Manual
This chapter consists of the following:
• Setting Up PM880 IR Communications - page 110
• Transferring and Printing Files Key - page 119
• Printing Files from the PM880 - page 119
• Printing Reports - page 123
• Transferring Files to a PC - page 124
• Transferring Files from a PC - page 127
7.1 Setting Up PM880 IR Communications
The PM880 is already setup for IrDA (Infrared Data Association) infrared
communications. Most PCs and devices use the IrDA protocol and the
PM880 should not need to be reconfigured. If necessary, the PM880 can
also be configured for IR232 communications.
The PM880 can communicate with PC’s operating with Windows NT
4.0/95/98/2000 or XP. If you are using Windows NT 4.0, you must use
QuickBeam
®
software. All other operating systems have IR software
capable of communicating with the PM880.
If you are using Windows 2000 or Windows XP, you must use the Add
Hardware wizard to tell Windows that an IR adapter is attached to the serial
port.
Note: The “IR adapter” is a device that plugs into a port and provides
infrared data transfer.
To Next Page
Loading...
