GE PM880 - Assigning;Re-Assigning a Function Key

Chapter 3. Using the PM880 Screen
38 Model PM880 Portable Hygrometer User’s Manual
3.3.1 Assigning/Re-assigning a Function Key
The function keys can be assigned using two methods as described below.
Note: You can re-assign the function key at any time by assigning a
different function.
3.3.1a Method 1: Using the Site Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Site and press [ENTER].
3. Use the arrow key to scroll to FKeys and press [ENTER].
4. Use the arrow keys to scroll to the desired key and press [ENTER].
5. Use the arrow keys to scroll to the desired function from the displayed
list.
6. Press [F3] (YES).
The PM880 returns to taking measurements. The newly assigned function
appears above the assigned function key.
3.3.1b Method 2: Using the Program Menus
1. Use the keypad to go to the function that you want to assign to the
function key.
2. Press the desired function key. A window appears with the question,
“Assign current menu command (XX) to FKeyX?”
3. Press [F3] (OK).
The PM880 returns to taking measurements. The newly assigned function
appears above the assigned function key.