Chapter 7. Using the PM880 with a PC and Printer
120 Model PM880 Portable Hygrometer User’s Manual
7.3.1 Printing a Site File
7.3.1a Accessing the Site Manager
1. If the menu in not active, press [MENU].
2. Use the arrow key to scroll to Site and press [ENTER].
3. Use the arrow key to scroll to Site Manager and press [ENTER].
7.3.1b Selecting a Site File
1. Use the arrow key to scroll to the desired site.
Note: The list of site files in the Site Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to Site and press [ENTER].
4. Make sure the IR beam on the PM880 has clear access to the IR sensor
on the printer.
5. Use the arrow key to scroll to Print and press [ENTER].
The PM880 indicates that it is searching for a receiving printer. If it spots
more than one compatible infrared device within its range, it asks you to
select the desired device.
6. Once the PM880 finds the printer, it asks you to confirm, press [F3]
(Yes) and then press
[MENU]. The PM880 returns to the Site Manager.
Next, do one of the following:
• If desired, repeat steps 1 through 6 in the previous section to print
another site file.
• To exit and return to taking measurements, press [F3] (Exit) and then
press
[MENU].
To Next Page
Loading...
