Chapter 5. Logging Data
84 Model PM880 Portable Hygrometer User’s Manual
5.4 Ending a Log
The End and End All Logs commands enables you to stop a log that is
currently running or pending. Once you end a log it cannot be restarted.
Note: The PM880 also has an Pause command that enables you to stop
the log temporarily. See Pausing a Log on page 82.
Use the following steps to start or restart one or more logs:
5.4.0a Accessing the Log Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Logging and press [ENTER].
3. Use the arrow key to scroll to Log Manager and press [ENTER].
5.4.0b Selecting a Log File
1. Use the arrow key to scroll to the desired log.
Note: The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to Log and press [ENTER].
4. Use the arrow key to scroll to End or End All Logs and press [ENTER].
The PM880 returns to the Log Manager, which displays the selected log as
Finished.
Next, do one of the following:
• To end another log, repeat the above steps.
• To return to taking measurements, press [F3] (Exit) and then press
[MENU].
To Next Page
Loading...
