GE PM880 - Transferring a File from a PC to the PM880

Chapter 5. Logging Data
82 Model PM880 Portable Hygrometer User’s Manual
5.2 Pausing a Log
The PM880 has two commands to pause logs: Pause and Pause All Logs.
The PM880 can only pause logs that are currently running.
Note: The PM880 also has an End command that enables you to stop the
log permanently. See Ending a Log on page 84.
Use the steps below to pause one or more logs:
5.2.0a Accessing the Log Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Logging and press [ENTER].
3. Use the arrow key to scroll to Log Manager and press [ENTER].
5.2.0b Selecting a Log File
1. Use the arrow key to scroll to the desired log.
Note: The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to Log and press [ENTER].
4. Use the arrow key to scroll to Pause or Pause All Logs and press
[ENTER].
The PM880 returns to the Log Manager, which displays the selected log as
Paused.
Next, do one of the following:
• To pause another log, repeat the above steps.
• To return to taking measurements, press [F3] (Exit) and press [MENU].