Chapter 6. Managing Files
102 Model PM880 Portable Hygrometer User’s Manual
6.4.2 Renaming a Log File
Use the steps below to rename a log file.
6.4.2a Accessing the Log Manager
1. If the menu is active, press [MENU].
2. Use the arrow key to scroll to Logging and press [ENTER].
3. Use the arrow key to scroll to Log Manager and press [ENTER].
6.4.2b Renaming a Log File
1. Use the arrow key to scroll to the desired site.
Note: The list of site files in the Log Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to File and press [ENTER].
4. Use the arrow key to scroll to Rename and press [ENTER].
5. Use the arrow keys to scroll to the desired letter or number and press
[ENTER]. Press [F1] (Delete) to delete any unwanted letters or
numbers.
6. Repeat this procedure until you have created the desired log name of up
to eight characters.
7. When you have finished, press [F3] (OK).
The PM880 renames the file and returns to the Log Manager.
Next, do one of the following:
• If desired, repeat steps 1 through 7 above for another file.
• To exit and return to taking measurements, press [F3] (Exit) and then
press
[MENU].
To Next Page
Loading...
