Chapter 6. Managing Files
Model PM880 Portable Hygrometer User’s Manual 101
6.4.1b Renaming a Site File (cont.)
4. Use the arrow key to scroll to:
• Save As and press [ENTER] - to create a copy of the file with a
different name.
• Rename and press [ENTER] - to change the name of the site file.
5. Use the arrow keys to scroll to the desired letter or number and press
[ENTER]. Press [F1] (Delete) to delete any unwanted letters or
numbers.
6. Repeat this procedure until you have created the desired site name of up
to eight characters.
7. When you have finished, press [F3] (OK).
8. Do one of the following:
• If you selected Save As, the PM880 prompts you to save the current
site, press
[F3] (Yes).
• If you selected Rename, the PM880 renames the file and returns to
the Site Manager.
Next, do one of the following:
• If desired, repeat steps 1 through 8 above for another file.
• To exit and return to taking measurements, press [F3] (Exit) and then
press
[MENU]. The newly renamed site file is displayed in the upper
left corner of the screen.
Note: The PM880 uses the renamed site file to take measurements. To
recall a different site file, refer to Recalling a Site File on page 98.
To Next Page
Loading...
