GE PM880 - Viewing All Logs

Chapter 5. Logging Data
Model PM880 Portable Hygrometer User’s Manual 85
5.5 Viewing All Logs
Logs are associated with the site in use at the time the log is created (or run).
By default, the Log Manager displays only the logs created with the site file
that is currently running. The Log Manager has a command that enables you
to view all existing logs regardless of the current site file.
Use the following steps to view all existing logs (finished or pending):
5.5.0a Accessing the Log Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Logging and press [ENTER].
3. Use the arrow key to scroll to Log Manager and press [ENTER].
4. Press [MENU].
5. Use the arrow keys to scroll to Log and press [ENTER].
6. Use the arrow keys to scroll to View All Sites and press [ENTER].
7. To return to taking measurements, press [F3] (Exit) and then press
[MENU].