Chapter 5. Logging Data
Model PM880 Portable Hygrometer User’s Manual 83
5.3 Starting or Restarting a Log
The Start and Start All Logs commands enable you to restart a paused log
or start a pending log.
Note: You cannot restart a log that is completed or ended using the End
command.
Use the following steps to start or restart one or more logs:
5.3.0a Accessing the Log Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Logging and press [ENTER].
3. Use the arrow key to scroll to Log Manager and press [ENTER].
5.3.0b Selecting a Log File
1. Use the arrow key to scroll to the desired log.
Note: The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to Log and press [ENTER].
4. Use the arrow key to scroll to Start or Start All Logs and press
[ENTER].
The PM880 returns to the Log Manager, which displays the selected log as
Running or Pending.
Next, do one of the following:
• To start or restart another log, repeat the above steps.
• To return to taking measurements, press [F3] (Exit) and then press
[MENU].
To Next Page
Loading...
