Chapter 7. Using the PM880 with a PC and Printer
116 Model PM880 Portable Hygrometer User’s Manual
7.1.1 Using the Add Hardware Wizard (cont.)
10. Select the Com port to which the IR adapter is attached.
Figure 54: Select the Communications Port Screen
The IR support should then be installed automatically.
11. Place the IR adapter in front of the PM880. You should hear a "bong"
and the following message will pop up:
Figure 55: Another Available Computer Message
At this point, you can transfer files from the PM880 to the PC using its Site
Manager/Log Manager/Drive Manager or by using PanaView.
Note: The previous figures represent the Windows 2000 screens. The
Windows XP process is similar.
To Next Page
Loading...
