Chapter 7. Using the PM880 with a PC and Printer
122 Model PM880 Portable Hygrometer User’s Manual
7.3 Printing a Site or Log File (cont.)
7.3.0a Entering a Time Window for Printing
1. The PM880 displays the start and end time of the log (see Figure 58).
Use the arrow and
[ENTER] keys to change the start date and/or time to
indicate what portion of the log you want to print. Do not edit the time
to print the entire log.
Figure 58: Enter Time Window
2. Make sure the IR beam on the PM880 has clear access to the IR sensor
on the printer and press
[F3] (OK).
The PM880 indicates that it is searching for a receiving printer and then
sends the file. If it spots more than one compatible infrared device within its
range, it asks you to select the desired device.
Note: If the PM880 cannot detect an infrared device, a window appears
indicating this problem. Reposition the PM880 and press
[F3],
Yes.Consult the factory if the PM880 is unable to make contact with
your PC.
Next, do one of the following:
• If desired, repeat the steps beginning in Selecting a Log File on the
previous page to print another log file.
• To exit and return to taking measurements, press [F3] (Exit) and then
press
[MENU].
-52.0
Enter Time
Start Date
End Date
Start Time
End Time
2003/03/01
2003/03/01
13:53:41 PM
13:23:41 PM
To Next Page
Loading...
