Chapter 3. Using the PM880 Screen
Model PM880 Portable Hygrometer User’s Manual 35
3.2.4 Setting Up the Numeric Format (cont.)
3. Use the arrow keys to scroll to Format and press [ENTER].
4. Use the arrow keys to select the desired selection and press [ENTER].
You can select from the following:
• Default - displays the factory default number of decimal digits for the
selected measurement.
• Fixed Decimal - specifies how many digits are to the right of the
decimal.
• Scientific format - displays the value in mantissa exponent format
(expressed to the power of 10).
5. Repeat steps 3 and 4 for Decimal Places or proceed to the next step to
exit. You can select from 0 to 4 places.
6. Press [F3] (OK). The PM880 displays the new format and resumes
taking measurements.
To Next Page
Loading...
