Chapter 4. Using Special Features
Model PM880 Portable Hygrometer User’s Manual 59
4.8.2b Entering a Label for the Function
1. The Function box should be highlighted. Press [ENTER] to open the
drop-down menu.
2. Use the arrow keys to scroll to the desired function number (User1,
User2, etc.) and press
[ENTER].
3. Use the arrow keys to move to the Label box and press [ENTER]. A
screen similar to Figure 25 appears.
Figure 25: Text Creation Window
4. Press [F1] (Delete) to delete any unwanted letters or numbers. Use the
arrow keys to scroll to the desired character and press
[ENTER]. Press
[SEL] to view additional character selections and symbols for creating a
label for the function.
5. Repeat this procedure until you have created the desired units symbol
for the function of up to thirty-two characters.
6. When you have finished, press [F3] (OK).
To Next Page
Loading...
