Chapter 4. Using Special Features
64 Model PM880 Portable Hygrometer User’s Manual
4.8.3b Entering a Label for the Table
1. The Table box should be highlighted. Press [ENTER] to open the
drop-down menu.
2. Use the arrow keys to scroll to the desired table number and press
[ENTER].
3. Use the arrow keys to move to the Table ID box and press [ENTER]. A
screen similar to Figure 28 appears.
Figure 28: Text Creation Window
4. Use the arrow keys to scroll to the desired character and press [ENTER].
Press
[F1] (Delete) to delete any unwanted letters or numbers. Press
[SEL] to view the three screens with the available characters and
symbols for creating a label for the table.
5. Repeat this procedure until you have created the desired label for the
table of up to thirty-two characters.
6. When you have finished, press [F3] (OK).
Note: It is not necessary to enter the “#Data Points” or “Max Points” text
boxes. The meter automatically enters this data.
To Next Page
Loading...
