Chapter 4. Using Special Features
Model PM880 Portable Hygrometer User’s Manual 67
4.9.0a Accessing the Response Command (cont.)
Figure 29: System Configuration Window
4.9.0b Selecting the Response Type
1. Use the arrow keys to move to the Response box and press [ENTER] to
open the drop-down menu.
2. Use the arrow key to select the desired response type and press
[ENTER]. You can choose from the following:
• NORM - no computer enhanced response
• CER - enable computer enhanced response
3. To return to taking measurements, press [F3] (OK) and then press
[MENU].
To Next Page
Loading...
