GE Venue Fit - Finding the System Network MAC (Physical) Addresses

DIRECTION 5854713-100, REVISION 2
VENUE FIT™ SERVICE MANUAL
Chapter 3 - System Setup 3-37
PRELIMINARY
3-8-3 Finding the system network MAC (Physical) addresses
The system allows the user to connect to the network in 2 ways:
• Wired connection - connecting the system to the network using a RJ45 network cable.
• Wireless connection - this is an optional feature, providing wireless network interface to the hospital
network.
Each network interface has a unique physical address that is sometimes required by the network
administrator to allow connection to the hospital network.
To find the MAC address:
1.) Open Settings -> Config -> Connectivity.
2.) Select TCP/IP tab.
3.) tap on MAC ADDRESSES.
Figure 3-26 MAC address Button
Figure 3-27 MAC addresses