DIRECTION 5854713-100, REVISION 2
VENUE FIT™ SERVICE MANUAL
3-46 Chapter 3 - System Setup
PRELIMINARY
3-8-7 Setup QView
1.) Open: Config -> Connectivity -> QView.
2.) Fill in the URL, Username and Password fields
3.) Tap Save.
4.) Reboot the system.
Figure 3-34 QView setup
3-8-7-1 QView Troubleshooting
In many situations, Qview does not have a clear route to Qpath URL.
Qview can be associated with a different network than the PACs, Qpath Image Storage or Worklist and
require a proxy, DNS (domain name system) or WINS (windows Internet name service) configuration
to provide a clear route between Qview and Qpath. refer to 3-8-8 -Changing the AE Title and/or Port
Number (Port No.).
To Next Page
Loading...
