DIRECTION 5854713-100, REVISION 2 VENUE FIT™ SERVICE MANUAL
8-12 Chapter 8 - Replacement Procedures
PRELIMINARY
8-2-6-5 M-PSB Installation Procedure
1) Align the M-PSB board on the C-FEB connectors and Gently apply pressure downwards to affix it
in place.
2) Tighten the 2 captive screws on the top side of the M-PSB module.
3.) Install the Speakers.
4.) Install Rear cover.
• Speakers Installation Procedure
• Rear Cover Installation Procedure
Perform the checks listed in Tab l e 8-3 6 - System Parts section
To Next Page
Loading...
