GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
7-132 Section 7-6 - Performing Back End Diagnostics on the System
7-6-1-3-9 Audio Test
NOTE: For a description of this test, refer to "Audio Test" on page 7-18.
1.) In the Diagnostic Test window, trackball to Audio Test in the list of Interactive PC Doctor tests
available for selection from the Diagnostic Test Tree (see Figure 7-96 below) and press Set. The Test
name is displayed under Execute; the relevant system components to be tested are highlighted light
blue in the Schematic View (BEP, Peripherals, Keyboard), as shown below:
2.) Trackball to the Start button and press Set.
The interactive PC Dr for Windows Audio Test screen is displayed, as shown in Figure 7-97.
3.) Trackball to the Left Channel, Right Channel, Both Channels or Midi button and press Set to select
the speaker from which to play sound.
NOTE: The Internal Speaker Beep is disabled.
Figure 7-96 Audio Test
Figure 7-97 PC Doctor for Windows Audio Test
To Next Page
Loading...
