GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-11
remove it from the Vivid q N and place it next to the system, as shown in Figure 8-15.
NOTE: When removing the Control Panel and Keyboard during other replacement procedures, Step 6
will only be required if indicated.
6.) Lift the Control Panel and Keyboard up to gain access to the cable connector underneath and
disconnect the control panel/keyboard cable from the system as shown in Figure 8-16.
Figure 8-15 Removing the Control Panel and Keyboard
Figure 8-16 Disconnecting the Control Panel/Keyboard Cable
To Next Page
Loading...
