GE
D
IRECTION FQ091019, REVISION 2 VIVID Q N SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-43
in Figure 8-59 below.
NOTE: When removing the BEP for replacement with the SATA BEP, disconnect the control
panel/keyboard cable (Figure 8-51) from the parallel BEP you have just removed and keep this
cable for installing on the SATA BEP.
Figure 8-50 Removing the BEP from the Bottom Assembly
Figure 8-51 Control Panel / Keyboard Cable
Control Panel
Keyboard Cable
To Next Page
Loading...
