EasyManua.ls Logo

General Dynamics URC-200 (V2) - Page 23

General Dynamics URC-200 (V2)
153 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
General Dynamics C4 Systems URC-200 (V2)
13
Battery Chargers
UBS-110 Battery Charger
The UBS-110 is a commercial grade battery charger. It charges one or two
BB-390/U or BB-590/U batteries.
LSBC-102(V)1 Battery Charger
The LSBC-102(V)1 is a ruggedized, military grade battery charger. It
charges one or two BB-390/U or BB-590/U batteries at once.
Interface Boxes
UIB-100 Power Interface Box
The UIB-100 is a power distribution box that attaches to the rear of the
URC-200 (V2) transceiver. It provides the mechanical connections to
distribute unfiltered 28VDC from a power supply or other source to the
transceiver and the UPA-55H power amplifier.
UFB-100 Filtered Power Interface Box
The UFB-100 is a power distribution box with an internal filter. It attaches to
the rear of the URC-200 (V2) transceiver. It provides the mechanical
connections to distribute filtered 28VDC from a power supply or other
source to the transceiver. It also provides unfiltered DC to the UPA-55 and
the UPA-55H power amplifier.
UBC-100 Battery Box
The UBC-100 attaches batteries to the rear of the URC-200 (V2) Transceiver
Shock Trays and Mounts
UST-100 Shock Tray
The UST-100 is used to mount the URC-200 (V2) Transceiver and power
interface/filter box in a vehicular or other setting where shock and vibration
damping is required.
UST-200 Shock Tray Mounts
The UST-200 is used to mount the URC-200 (V2) Transceiver in a 10 watt
or 30/50 watt system configuration in a vehicular or other setting where
shock and vibration damping is required.
URM-100 Rack Mount
The URM-100 is used to mount the URC-200 (V2) Transceiver in a 10 watt
or 30/50 watt system configuration in a 19” rack.

Table of Contents