Genie Z Series User Manual

Maintenance Manual April 2018
Programmed Maintenance Procedures
132 S
®
Booms • Z
®
Booms Part No. 1268489GT
P0-4
Continental Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
Continental TME27
Hour Intervals
Procedure
∅ =
Not required
Daily 50 100 250 500
Visual inspection of engine
∅ ∅ ∅ ∅
Oil level - check
∅ ∅ ∅ ∅
Air cleaner - check
∅ ∅ ∅ ∅
PCV system - check
∅ ∅ ∅ ∅
Coolant level - check
∅ ∅ ∅ ∅
Oil, fuel and coolant systems - check for leaks
∅ ∅ ∅ ∅
Air filter discharge valve - clean
∅ ∅ ∅ ∅
Fan belt tension - check
∅ ∅ ∅ ∅
Battery - check
∅ ∅ ∅ ∅
Engine oil - replace
∅ ∅ ∅ ∅
Oil filter - replace
∅ ∅ ∅ ∅
Harness connections - check
∅ ∅ ∅ ∅
Cooling system - check
∅ ∅ ∅ ∅
Air filter - replace
∅ ∅ ∅ ∅
PCV valve - check
∅ ∅ ∅ ∅
Valve tappet clearance - adjust
∅ ∅ ∅ ∅
Fuel system - check
∅ ∅ ∅ ∅
Fuel pump - check
∅ ∅ ∅ ∅
Fuel filter - replace
∅ ∅ ∅ ∅

Genie Z Series Specifications

General

Lift Capacity	500 lb (227 kg) to 660 lb (300 kg)
Gradeability	30%
Power Source	Diesel, Electric
Capacity	500 lb (227 kg) to 1, 000 lb (454 kg)
Drive System	4-wheel drive
Tire Type	Solid
Steering	2-wheel or 4-wheel