Genie Z Series User Manual

April 2018 Maintenance Manual
Programmed Maintenance Procedures
Part No. 1268489GT S
®
Booms • Z
®
Booms 139
P0-11
GM 3.0L Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
GM 3.0L Engine
Hour Intervals
Procedure
∅ =
Not required
Daily 100 150 200 250 400 800
Coolant level - check
∅ ∅ ∅ ∅ ∅ ∅
Oil level - check
∅ ∅ ∅ ∅ ∅ ∅
Oil, fuel and coolant systems - check for leaks
∅ ∅ ∅ ∅ ∅ ∅
Radiator – clean
∅ ∅ ∅ ∅ ∅ ∅
LPG Vaporizer - drain/clean
∅ ∅ ∅ ∅ ∅ ∅
Air cleaner element - clean/replace
∅ ∅ ∅ ∅ ∅ ∅
Engine oil and filter – replace
∅ ∅ ∅ ∅ ∅ ∅
Fuel filter - replace
∅ ∅ ∅ ∅ ∅ ∅
Air filter - replace
∅ ∅ ∅ ∅ ∅ ∅
Distributor cap - replace
∅ ∅ ∅ ∅ ∅ ∅
Spark plug wires - replace
∅ ∅ ∅ ∅ ∅ ∅

Genie Z Series Specifications

General

Lift Capacity	500 lb (227 kg) to 660 lb (300 kg)
Gradeability	30%
Power Source	Diesel, Electric
Capacity	500 lb (227 kg) to 1, 000 lb (454 kg)
Drive System	4-wheel drive
Tire Type	Solid
Steering	2-wheel or 4-wheel