Genie Z Series User Manual

Maintenance Manual April 2018
Programmed Maintenance Procedures
160 S
®
Booms • Z
®
Booms Part No. 1268489GT
P5-1
Perform Engine Maintenance –
5000 Hours
Engine specifications require that this procedure be
performed every 6,000 hours.
Required maintenance procedures and additional
engine information are available in the
manufacturer's manuals. Refer to Specifications,
Engine Operator and Maintenance Manuals.
GM 3.0L
• Cooling system coolant - replace
P6-1
Perform Engine Maintenance –
6000 Hours
Engine specifications require that this procedure be
performed every 6,000 hours.
Required maintenance procedures and additional
engine information are available in the
manufacturer's manuals. Refer to Specifications,
Engine Operator and Maintenance Manuals.
Perkins 1104D-44T
• Cooling system coolant extender (ELC) -
add

Genie Z Series Specifications

General

Lift Capacity	500 lb (227 kg) to 660 lb (300 kg)
Gradeability	30%
Power Source	Diesel, Electric
Capacity	500 lb (227 kg) to 1, 000 lb (454 kg)
Drive System	4-wheel drive
Tire Type	Solid
Steering	2-wheel or 4-wheel