Name: Gent System 800
Brand: Gent
Rating: 5 (1 reviews)

Table of Contents2

Scope4

General System Description5

Notes to the Installer7

Cables9

Panel Installation9

Connecting External Circuits13

External Circuits14

Commissioning Process21

Hardware Link22

Power up23

Operating Instructions26

To Select a Menu Option26
To Carry out a Display Test26
To View Active Fire Events27
To View Active Fault Events27
To View Disablements27
To View Historic Events28
To View the Software Version28
To Enter an Access Level (Eg 2, 3 or 4)28
To Exit to Access Level 129
To View Loop Status29
To Activate Delay Mode Faciity30
To View Loop Map30
To Power down the Loop Circuit31
(Assuming the Loop Is Powered Up)31
To Power up the Loop Circuit32
(Assuming the Loop Is Powered Down)32
To Start Detection Process on the Powered up and Allocated Loop33
- To Identify MCP Required to be Fire Tested on a Weekly Test34
- To Exit Fire Test Mode (Assuming Fire Test Is On)34
- To Edit a Zone Label35
- To Put a Zone in and out of Test Mode36
- To Enable or Disable a Zone37
- To Put a Zone in False Alarm Rejection Mode38
- To Select 2-Detectors or 2-Zones Coincidence Detection3939
- To Assign a Zone to Trigger a Sector40
- To View Devices in a Selected Zone41
- To Enable / Disable a Device42
- To Edit a Device Label43
- To Assign a Device to a Zone44
- To Set Auxiliary Relay Operation (Eg to Operate with Fire, Fault, Disablement, Pre-Alarm or Off)45
- To Set Fire Routing Output Operation (Eg Change Activation Type, Delayed Operation of Relay and Monitoring)46
- To Set Fault Routing Operation (Eg Activation Type)47
- To View / Enable or Disable Alarms Sounders48
- To Set Weekly Alarm Test Reminder Message (Eg Day and Message)49
- To Set / View Maintenance Reminder Message50
- To Set Delay and Verify Functions51
- To Set the Local Input52
- To Set Time and Date53
- To Change an Existing Password54
- To Set up the Access Level for Cancel Buzzer and Display Test Controls55
- To Edit User Text56
- To Clear Logs57
- To Save the Loop Map57
- To Reset All Access Codes to Factory Settings58
- To Reset the Panel Configuration to Factory Settings58
- To Reset All Configurations and Labels to Factory Settings5959
- To View Diagnostic Data59
Appendix - Description of Controls and Indicators60
- Controls61
- Light Indications62
- Message Description List for System 80064
Product Data69
Notes70

Brand	Gent
Model	System 800
Category	Fire Alarms
Language	English

Gent System 800 User Manual

Table of Contents

Questions and Answers:

Gent System 800 Specifications