Gent System 800 - Menu Navigation and Access Levels

796688 (4188-657)_i2 _06/03
25
Menu map and access
levels
Access level 1 = General mode
Access level 2 = Security mode
Access level 3 = Customer mode
Access level 4 = Engineering
mode
The menu map below shows the functionality available to
the user at various access levels.
To gain access to the panel controls and menu options,
the user must enter the appropriate code for the desired
access level.
Menu map at A2 Access level 2 (Code 2222)
Menu map at A1 Access level 1 (No code required)
Menu Map at A3 Access level 3 (3333)
Menu Map at A4 Access level 4 (4444)
At this level access is available to the
operation and if confi
g
ured the can also operated.
system logs, coded entry to other levels, cancel buzzer
display test
This level is for securit
y
personal.
This level is for customer's technician responsible for the s
y
stem.
This level is for en
g
ineerin
g
use onl
y
.
At this level the loo
p
is disabled and events are not detected.
A2min, A3min and A4min si
g
nify minimum
access level required for the operation.