GA5000 gas analyser OMGA5KN4.4
Copyright Geotech Page 113 of 113
Enables the operator to answer pre-defined
questions relating to the site, environment etc.
These questions are defined via 5GAM
software.
Terminology used for the movement of data
from the PC via GAM software application to the
analyser.
The volume of a gas that passes through a
given surface per unit of time e.g. m
3
/hr
Pre-determined self-test sequence to test the
analyser functions which takes place after the
analyser is switched on.
The instrument is under guarantee against
defect in materials and workmanship for a
period of 3 years from the date of shipment to
the operator and is subject to the
recommended service and recalibration
requirements.
Device used to protect the instrument from
water or moisture ingress.
The point at which the gas analyser is
calibrated when there is none of the target gas
present.
This option allows the relative pressure
transducer to be zeroed.