Geotech GA5000 - Answering ID Questions; Special Action

GA5000 gas analyser OMGA5KN4.4
 Copyright Geotech Page 47 of 113
8.3 Answering ID questions
Prior to, or after, you have taken the reading, the ID questions should be populated, this is
only necessary when using ID questions, if not, please proceed with the reading as
normal. When you have uploaded IDs with ID questions assigned to them (Gas Analyser
Manager (GAM) software required), you will be prompted to answer these questions at the
end of the reading, this means that the answer only equates to that reading.
8.4 Special action
This menu enables the operator to perform the additional following functions out of
sequence if so desired.
1) From the ‘Main Gas Read Screen’ select the soft-key ‘Special Action’ and the
following menu is displayed:
Special action menu
 Note: The list of special action options displayed on the special action menu is
dependent upon device type and sequence.
The following special actions may be performed:
Action
Function
Key 1 – Simple Gas
This action enables the operator to take a quick
gas reading. The pump will start running
automatically when this key is selected. The
operator can stop the pump by pressing the pump
key on the keypad at any time and the reading can
then be stored by selecting soft-key ‘Store’.
Key 2 – Site Questions
This action enables the operator to update site
questions prior to taking a reading.