OMGA5KN4.4 GA5000 gas analyser
Page 44 of 113 Copyright Geotech
3) Use the cursor keys to move throughout the list of IDs displayed; select the ‘Enter’
key to select choice of ID, default if no IDs are listed or soft-key ‘Skip’ to skip the
selection.
4) The operator will return to the ‘User settings’ menu.
Note: If no technicians are loaded via GAM this section is skipped during start
up and the ‘Technician ID’ icon is removed from the menu.
7.5 Exit menu
1) Press the ‘Menu’ button on the front of the analyser to exit settings.
To Next Page
Loading...
Need help?
General
