IMPORTANT:
1. If Dynamic IP Address or PPPoE is enab
which IP address the camera will get from D
log in. If your camera is installed in the LAN,
Utility to look up its current dynamic IP addres
led, you need to know
HCP server or ISP to
use the GV-IP Device
s. See 19.1.1
r camera uses a public
amic DNS Service to
linked to the camera’s changing IP
ddress and PPPoE, see
21.7.1 LAN Configuration and 21.7.3 Advanced TCP/IP.
2. If Dynamic IP Address or PPPoE is enabled and you cannot
access the camera, you may have to reset it to the factory default
and then perform the network settings again.
To restore the factory settings, see 23.3 Restoring to Factory
Default Settings.
Checking the Dynamic IP Address. If you
dynamic IP address via PPPoE, use the dyn
obtain a domain name that is
address first. For details on Dynamic IP A
272
To Next Page
Loading...
Need help?
General
