GeoVision GV-FD220D User Manual

5.6.1 Enabling IR LED after Loading Default
Each GV-IR Arctic Box Camera is equipped with 4 IR LEDs to provide
infrared illumination at night. The factory-loaded setting for the IR LED
function is
enabled. If you have restored the camera to default settings,
please follow the steps below to enable the IR LED function.
1. In the left menu of Web interface, select
Video Settings and then
Streaming 1.
2. Enable
Trigger IR by D/N in IR Check Function.
Figure 5-17
3. Click
Apply.
56

GeoVision GV-FD220D Specifications

General

Brand	GeoVision
Model	GV-FD220D
Category	Security Camera
Language	English