îš„ Input: Note this function is only supported
function. Manually starts I/O monitoring. W
by cameras with I/O
hen the sensor input is
put will be activated for
1.2.1 Input Setting.
e system starts motion detection and I/O monitoring
ac o the schedule you have set. For schedule settings, see 21.5
Recording Schedule.
s Icon]
triggered, its associated camera and out
recording and alerting. For this setting, see 2
[Schedule] Th
cording t
[Camera Statu
: On standby
: Enabled for motion detection and input trigger
: Recording is on.
21.4.1 Monitoring Settings for Target Series
In the Monitoring Settings page for Target eries, click Start to activate e-
e sure to complete related settings on the
Motion Detection and FTP page.
S
mail and FTP alert functions. B
Figure 21-24
366
To Next Page
Loading...
Need help?
General
