23.3 Restoring to Factory Default Settings
Please refer to the corresponding section of your camera type and follow
the steps to restore factory default settings.
Box Camera
1. Keep the power and network cables connected to the camera.
2. Use a pin to press and hold the default button on the back panel of
the camera.
Default button
Figure 23-8
3. Release the default button when the status LED blinks. This shall
take about 8 seconds.
Status LED
Figure 23-9
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
420
To Next Page
Loading...
Need help?
General
