Accessing the Camera
20
20.2.8 Remote Configuration
You can upgrade firmware over the network. Click the Show System
ote Config. The Remote
is tab, you can upgrade the firmware over the
, Chapter 22.
e Display
the Show System
u button (No. 8, Figure 20-3), and select Show Camera Name.
20.2.10 Image Enhancement
To enhance the image quality of live video, click the Show System Menu
gure 20-3), and sele mage Enhance. This dialog box
Menu button (No. 8, Figure 20-3), and select Rem
Config dialog box will appear.
[Firmware Upgrade] In th
Internet. For details, see Advanced Applications
20.2.9 Camera Nam
To display the streaming name on the image, click
Men
button (No. 8, Fi
appears.
ct I
Figure 20-13
îš„ De-Interlace: Converts the interlaced video into non-interlaced video.
îš„ De-Block: Removes the block-like artifacts from low-quality and
highly compressed video.
îš„ Enable DirectDraw: Activates the DirectDraw function.
307
To Next Page
Loading...
Need help?
General
