CMS Configurations
25
îš„ Manual close channel: Closes the triggered camera view
manually.
îš„ Close the camera view when motion stopped: Closes the
triggered camera view automatically when motion stops.
îš„ Post Motion: Specify the duration of the camera view remaining
on the monitoring window after a motion stops.
îš„ Camera send by I/O trigger will monitor: Specify the duration
of the camera view remaining on the monitoring window when an
I/O device is triggered.
To keep the camera view remaining on the monitoring window
even after the alarm is finished, click the right-arrow button, and
uncheck Latch Trigger. Then the camera view will remain on
the monitoring window for the specified time. For example, if the
alarm is triggered for 5 minutes and you set 10 minutes, the
camera view will be displayed for 15 minutes.
For further information on how to mange the video received from the IP
camera, see GV-CMS Series User’s Manual.
469
To Next Page
Loading...
Need help?
General
