Getting Started 1-9
Connecting to AC Power and Charging the
Battery
Be sure to fully charge the battery before using your device for the first time.
1. Plug the DC cord of the AC adapter into the power connector of the
device (
n).
2. Plug the female end of the AC power cord into the AC adapter and the
male end into an electrical outlet (
o).
3. The charge indicator glows in amber when charging is in progress. Do
not disconnect your device from AC power until the battery is fully
charged, as indicated by the amber indicator turning into green. This will
take a couple of hours.
CAUTION: For optimal performance of the lithium battery, take note of the
following:
z Use the included AC adapter only.
z There is no need to fully discharge the battery before charging. You can
charge the battery before it is discharged.
z Do not charge the battery where the temperature is high (e.g. in direct
sunlight).
To Next Page
Loading...
Need help?
General
