| 88 | 5 Service Interfaces | CARDIOHELP System |
Service Manual | 3.3 | EN | 05
Copyright Maquet Cardiopulmonary GmbH
▶ This may take some time, depending on the amount of events.
▶ The message “Events saved” is displayed.
"Events saved" message
4 Click on the [OK] button.
5 Select the events according to your requirements (⇨ "Selecting Events", page 89).
Open Events
1 Click on the [Open event] button.
[Open event] symbol
2 Click on the [Open] button.
3 Select the desired file and click on the [Open] button.
"Events" screen
▶ C:/mydocuments/MAQUET/CARDIOHELPServiceTool/ PoolReadout/...
▶ The events are displayed.
4 Select the events according to your requirements (⇨ "Selecting Events", page 89).