GHL ProfiLux 4 Resource Guide

ProfiLux 4 Resource Guide
EN 2018-13-11 14
 Show graphs: Click here to view graphical data. You will be asked to locate the file
which contains the graph data for your probes.
GCC Tabs: Extras
This tab is where you’ll find various options ranging from firmware updates, touch key
calibration, restore factory settings, etc. These options are only clickable when you are
connected to a GHL device.
 Default settings: Click here to restore your GHL device back to factory settings.
 Firmware update: Click here to update the firmware on your P4 controller.
 WiFi-Module update: Click here to update the Wi-Fi module firmware for your P4.
 Serial number: Click here to display your device serial number
 Keys: Click here to calibrate the touch keys on your P4 controller.
 PIN: Click here to assign a PIN for your P4 controller. This option will make your device
password protected.
 Firmware update (PAB): Click here to update the firmware on a GHL PAB-device.
 Serial number (PAB): Click here to view PAB-device serial number
 Calibration (Expansion Box): Not applicable to this guide.
GCC Tabs: Backup and restore
This is where you can backup and restore your ProfiLux 4’s settings and probe calibration data.

GHL ProfiLux 4 Specifications

General

Model	ProfiLux 4
Category	Controller
Power Supply	12V DC
pH Ports	2
Redox Ports	1
Conductivity Ports	1
Level Ports	4
Digital Inputs	4
12V Outputs	4
Real-time clock	Yes, with battery backup
Digital Outputs	4
Expandable	Yes
Connectivity	USB, Wi-Fi, LAN
Display	Graphic LCD display
Expansion Slots	4
Processor	32-bit
Channels	16
Operating Temperature	0°C to 50°C