ProfiLux 4 Resource Guide
EN 2018-13-11 40
E. Once your dosing schedule has been created, a graph will be displayed. This will show
you when the doses will occur throughout the day.
F. Available ONLY for the
Automatically
option. Here you can specify how many times per
day you want to dose and how many ml each dose will consist of. You can also specify
what time you’d like the dosing schedule to begin for the day.
G. Here you can specify the days you want to dose.
At special weekdays: Select the days to dose.
In day-intervals: Select how often to run the dosing schedule. For example, if
the doser should dose every 2 days, set
Repeat all
to 2. The
Starting in
option is
a dosing schedule delay. With this option, the schedule can be created today and
set to start on another day. For example,
Starting in
set to 2 will set the dosing
schedule to begin in 2 days.
Extras – Stream group
The Stream group settings page is where one can configure the behavior of 1-10v pumps and
Vortech flow pumps. Any 1-10v compatible pump can be controlled through these settings.
ProfiLux can support up to 16 of these pumps. These pumps can then be grouped into 4
separate groups.
A. This is the nocturnal flow option that allows you to specify a time-range for when the
pumps assigned to this group should decrease flow output.
To Next Page
Loading...
Need help?
General
