To Next Page

To Previous Page

ProfiLux 4 Resource Guide

EN 2018-13-11 105

How to update ProfiLux 4 Wi-Fi module, Web Server,

and Web Interface

Updating the Wi-Fi module firmware on your ProfiLux 4 allows you to benefit from new web-

based features and Wi-Fi signal improvements. This section will show you how to update

network-based firmware such as Wi-Fi module, Web Server, and Web Interface on your

ProfiLux 4 controller.

NOTE

These kind of updates can be performed in different ways; web browser and

direct USB connection via updater tool. The steps that follow will show you

how to updating using the “Web browser“ method. This method will require

you to know the IP address of your P4.

IMPORTANT

Before proceeding with the update, please make sure that the ProfiLux 4 is

NOT connected over GCC wirelessly or via the GHL Control app. This means

that you should NOT have an active connection over GCC wirelessly or the

app while following the steps below. Make sure you are also NOT connected

over USB when following these steps.

Need a visual?

You can view our how-to video by clicking the link below.

GHL Wi-Fi Module, web server, web interface update for P4:

https://youtu.be/FJxPdwCqVaM

Alternative method via USB:

https://youtu.be/6z_7fhzJL-Q

To update your ProfiLux 4 Wi-Fi module firmware, please follow these steps:

1. Open a web browser window; we recommend Chrome or Internet Explorer.

2. Type-in the IP address of the P4 into the website address bar and press ENTER.

 If you are asked to enter a USER NAME and PASSWORD, enter the following:

i. USER NAME: admin

ii. PASSWORD: Starfish

Other manuals for GHL ProfiLux 4

Questions and Answers:

Need help?

Do you have a question about the GHL ProfiLux 4 and is the answer not in the manual?

General