To Next Page

To Previous Page

ProfiLux 4 Resource Guide

EN 2018-13-11 50

 This page provides an overview of all 64 controllable sockets and displays their current

states.

 Double click on the desired Powerbar socket and a new window will pop-up. This

window is where you get to assign a specific function to the selected socket. Select the

function to assign, type-in a description, set a Blackout-delay if needed, click OK.

 Blackout-delay: In case of a power outage, you can individually set each socket to

turn back ON after a period of time after the power has been restored. This feature is

useful for preventing skimmer overflows and more.

System – 1-10V interface

All 1-10V devices that are to be controlled by the ProfiLux are first programmed through the 1-

10V interface settings page. Here is where you select an L-channel and assign the device to a

certain function.

Other manuals for GHL ProfiLux 4

Questions and Answers:

Need help?

Do you have a question about the GHL ProfiLux 4 and is the answer not in the manual?

General