GHL ProfiLux 4 Resource Guide

ProfiLux 4 Resource Guide
EN 2018-13-11 86
6. Set the Max. duration for this maintenance mode.
 240 minutes (4 hours) is the maximum allowed time.
7. Click SAVE CHANGES.
How to setup ATO control (1 or 2 sensors)
This section will show you how to setup and assign an ATO function to an outlet on your
Powerbar. First, you will create the function, then you will assign the function to an outlet on
your GHL Powerbar.
In order to setup ATO control, you will need certain items. These items can be purchased at
your preferred GHL dealer:
ATO w/ 1 sensor
ATO w/ 2 sensors
 PL-1095 PL-LF-Base 2 (Assembly rod)
 PL-0077 Float sensor OR PL-0082
Optical sensor
 PL-0723 PL-LF-S12 (For optical
sensor)
 PL-0080 PL-LF-S8 (For float sensor)
 PL-1095 PL-LF-Base 2 (Assembly rod)
 Any combination of 2 sensors: PL-
0077 Float sensor OR PL-0082 Optical
sensor
 PL-0723 PL-LF-S12 (For optical
sensor)
 PL-0080 PL-LF-S8 (For float sensor)

GHL ProfiLux 4 Specifications

General

Model	ProfiLux 4
Category	Controller
Power Supply	12V DC
pH Ports	2
Redox Ports	1
Conductivity Ports	1
Level Ports	4
Digital Inputs	4
12V Outputs	4
Real-time clock	Yes, with battery backup
Digital Outputs	4
Expandable	Yes
Connectivity	USB, Wi-Fi, LAN
Display	Graphic LCD display
Expansion Slots	4
Processor	32-bit
Channels	16
Operating Temperature	0°C to 50°C