GHL ProfiLux 4 Resource Guide

ProfiLux 4 Resource Guide
EN 2018-13-11 104
6. Type in this COM number and click NEXT.
7. Select the firmware file to use for this update and click NEXT to begin the update.
 If you are using the newest version of GCC, the software automatically selects
the newest relevant FW file
8. The update will now begin. You may notice a pop-up message that states to reset the
device and click OK. IGNORE that message as it will go away on its own.
9. When you see the “Update completed!” Message, click NEXT.
10. Click FINISH, then restart your ProfiLux 4 by disconnecting it from the power and
plugging it back in.
 Upon boot-up, the P4 will display the new firmware version

GHL ProfiLux 4 Specifications

General

Model	ProfiLux 4
Category	Controller
Power Supply	12V DC
pH Ports	2
Redox Ports	1
Conductivity Ports	1
Level Ports	4
Digital Inputs	4
12V Outputs	4
Real-time clock	Yes, with battery backup
Digital Outputs	4
Expandable	Yes
Connectivity	USB, Wi-Fi, LAN
Display	Graphic LCD display
Expansion Slots	4
Processor	32-bit
Channels	16
Operating Temperature	0°C to 50°C