GHL ProfiLux 4 Resource Guide

ProfiLux 4 Resource Guide
EN 2018-13-11 20
5. Enter the following information:
 SSID: Exact name of your Wi-Fi network
 Encryption: WPA WPA2PSK
 WiFi Key: Your Wi-Fi password
6. Select USE FOLLOWING SETTINGS.
7. Enter the following information:
 IP address: The IP address you wish to assign to the P4
i. The first 3 set of numbers must match the first 3 set of numbers of the
Gateway
 Subnet Mask: Found in your network details
 Gateway: Found in your network details, also the IP address of your router
 DNS: IP address of the DNS, usually it’s the same as your Gateway IP
TIP
You can find the details of your network by using Windows Command
Prompt and typing-in ipconfig , then pressing enter. Look for Subnet Mask
and Default Gateway and type it into the respective fields in the
Communication settings page.
8. Click SAVE CHANGES, then DISCONNECT.

GHL ProfiLux 4 Specifications

General

Model	ProfiLux 4
Category	Controller
Power Supply	12V DC
pH Ports	2
Redox Ports	1
Conductivity Ports	1
Level Ports	4
Digital Inputs	4
12V Outputs	4
Real-time clock	Yes, with battery backup
Digital Outputs	4
Expandable	Yes
Connectivity	USB, Wi-Fi, LAN
Display	Graphic LCD display
Expansion Slots	4
Processor	32-bit
Channels	16
Operating Temperature	0°C to 50°C