To Next Page

To Previous Page

ProfiLux 4 Resource Guide

EN 2018-13-11 84

NOTE

In the

Filter off

column, you will see that the boxes are checked. A checked

box means that when a certain FP is activated, any powerbar outlet with the

corresponding function – FILTER will be turned OFF. An unchecked box will

not affect those outlets.

ASSIGNING THE FUNCTION

1. Click on the (+) icon to the left of

System.

2. Select SWITCH CHANNELS AND OUTLETS.

3. Select the Powerbar outlet(s) that you’d like to react to this FP.

4. Set the function to FILTER and select the FILTER number you used when you created

the filter function.

 For example, if you created the function on FEED PAUSE 1, set the function to

FILTER 1. If FEED PAUSE 2 was used, set the function to FILTER 2, etc.

5. Type-in a description in both fields, set a black-out delay if necessary, and then click OK.

6. Click SAVE CHANGES.

Other manuals for GHL ProfiLux 4

Questions and Answers:

Need help?

Do you have a question about the GHL ProfiLux 4 and is the answer not in the manual?

General