MOVE & INSTALLATION
☞ Unpacking
1. Product is packed with vacuum aluminum packing materials to avoid corrosion and
external packing is wooden crate.
Each wooden panel is assembled with screws to prevent external shock
2. Wooden crate can be disassembled by 11mm box spanner.
Disassemble the 5 panels on the left picture and remove vacuum packing materials. Then,
move it to the installation place.
☞ Move the product
◑ Before it is moved
1. Unplug the power cord & air hose from the laminator.
2. Release the caster wheels and separate the height adjustable legs.
◑ In the following cases, it requires to move it by forklift.
1. If the ground is not level.
2. If it is required to be moved it to more than 10m distance.
3. After unpacking and move it to an installation area.
To Next Page
Loading...
