GMP METALLIC SLEEKING FOIL makes different effect on the printed area for highlight.
Conditions for METALLIC SLEEKING FOIL METALLIC SLEEKING FOIL
Model
Speed Set Temp.(℃) Pressure (MPa)
② SILVER
PROTOPIC III Series
3 110 0.5
(Table 3.1)
How to load the Foils (Picture 3.1)
(Picture 3.2)
NOTE : This is for sleeking operation to display gloss/matt, hologram,
gold/silver foil in various effect.
The method of installation of Sleeking Idle Bar is as How to use
the Main Devices.
To Next Page
Loading...
